Expansion boards, Identifying the pci and isa expansion slots – Compaq AP500 User Manual
Page 32
3-12
Removal and Replacement Procedures
Expansion Boards
This section discusses removal and replacement procedures for PCI or ISA expansion boards and
the Accelerated Graphics Port (AGP) graphics controller.
NOTE: The following instructions also apply to installing and removing graphics controllers. For
information about the installed graphics controller, refer to the appropriate guide on the
SmartStart for Workstations CD under X:/DOCS/GRAPHICS, where X is the CD-ROM or DVD-ROM
drive on your machine.
Identifying the PCI and ISA Expansion Slots
The Compaq Professional Workstation AP500 contains five expansion slots on the I/O bracket
assembly: three PCI expansion slots, one shared PCI/ISA expansion slot, and one ISA expansion
slot. The following illustration identifies the physical locations. See the corresponding table for
component names.
1
2
3
4
5
Figure 3-10. Identifying the expansion slots