KGUARD Security OT1601 - Manual (Page 90)

ENGLISH
Chapter 5: KGUARD Web Client
90
DVR User’s Manual
« TIP »
To cancel any modifications and retain the existing settings, click Refresh.
User Account Setup
To authorize user accounts, you must login with an administrator account and then do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click System > User. The Users screen appears.
3
Select the user account from the table.
4
On User Name, enter the desired user name.
5
Enter the desired password on the Password and Confirm fields.
6
On Active, select Enable. The access rights table appears below.
7
Enable Password.
8
Check the settings that the user is allowed to access on the access rights table.
9
When all settings are complete, click Save.
System Information
Use the Information menu to view the device and firmware information.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click System > Info. The Information screen appears.