KGUARD Security OT1601 - Manual (Page 82)

ENGLISH
Chapter 5: KGUARD Web Client
82
DVR User’s Manual
Mobile Devices Setup
The DVR provides remote access using your mobile phone or a tablet PC. See the Support Manual in the enclosed CD
for the list of supported mobile devices.
Before using this feature, make sure the DVR is connected to the Internet.
To configure mobile device setup, do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > Mobile. The Mobile screen appears.
3
Enter the User Name and Password you use to login to the DVR.
4
On Mobile Port, enter the monitoring port of your mobile device. The port range is between 1024 to 65535.
Note:
The Mobile Port specified here must be the same port on your mobile device.
5
After all settings are complete, click Save.
« TIP »
To cancel any modifications and retain the existing settings, click Refresh.
After performing the above procedures, install the Kguard mobile device utility on your mobile device.
See
“Chapter 6: Using KView Series Software” on page 95 for further details.