2 record setup, 1 record parameter – KGUARD Security OT1601 User Manual
Page 35

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
35
8
Click the right mouse button to close the Select Mask screen.
Masked area
9
After all settings are complete, click Apply.
10
When data saving is complete, click OK.
« TIP »
To copy the privacy zone setting to other channels, select the channel(s) in Copy To, then click Copy.
4.2 Record Setup
With RECORD menu, you can customize the recording settings, set the recording schedule and framerate.
4.2.1 Record Parameter
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
> RECORD.
3
Modify the necessary settings.
Menu item
Description
Channel
Select the channel that you want to configure.
Record
Enable/Disable record mode.
Pack
Duration
Set the elapsed time per recording (15 Min/30 Min/45 Min/60 Min).
PreRecord
Enable/Disable recording prior to motion detection recording is triggered.
Copy To
Copy the current settings to all channels or one specific channel.
4
After all settings are complete, click Apply.
5
When data saving is complete, click OK.