KERN & SOHN KET-TM User Manual

Kern ken-tm / ket-tm, Kern & sohn gmbh

This manual is related to the following products:

KEN-TM

Table of contents

Document Outline

1 Technical data
- 1.1 Dimensions
- 1.2 Anschlüsse / Schnittstellen
  - 1.2.1 KET-TM
  - 1.2.2 KEN-TM
2 Control elements and program structure
- 2.1 Keyboard overview
- 2.2 Overview of display
- 2.3 Program structure
  - 2.3.1 Menu overview
  - 2.3.2 Navigation in the menu
- 2.4 Authorisation levels
3 Basic instructions
- 3.1 Proper use
- 3.2 Improper Use
- 3.3 Warranty
- 3.4 Monitoring of Test Resources
4 Basic Safety Precautions
- 4.1 Pay attention to the instructions in the Operation Manual
- 4.2 Personnel training
5 Transport and storage
- 5.1 Testing upon acceptance
- 5.2 Packaging / return transport
6 Unpacking, Setup and Commissioning
- 6.1 Installation Site, Location of Use
- 6.2 Unpacking and placing
- 6.3 Scope of delivery / serial accessories
- 6.4 How to connect the platform
- 6.5 Mains connection
- 6.6 Commissioning
- 6.7 Log out
- 6.8 Putting out of service / Standby mode
- 6.9 Basic Operation
- 6.10 Connection of peripheral devices
7 System settings (menu)
- 7.4.1 Select information texts
- 7.4.2 Selecting function keys
- 7.4.3 Display all platforms
- 7.4.4 Select bargraph type
- 7.5.1 Inputs
- 7.5.2 Outputs
8 Application settings
- 8.1 Select application
- 8.2 Application specific settings
- 10.1 Select application
- 10.2 Application specific settings
  - 10.2.1 Automatic reference optimization
  - 10.2.2 Minimum reference single weight
- 10.3 Carry out parts counting
  - 10.3.1 Determination of the reference piece weight by weighing
  - 10.3.2 Enter reference single weight as numeric value
- 10.4
  - 10.4.1 Load reference single weight from database.
  - 10.4.2 Allocating reference single weight in database to a product
- 11.1 Select application
- 11.2 Application specific settings
- 11.3 How to carry out percentage calculation
  - 11.3.1 Determination of the reference weight by weighing
  - 11.3.2 Enter reference weight as numeric value
- 12.1 Select application
- 12.2 Application specific settings
- 12.3 Defining recipe in database
- 12.4 Process recipe from database
- 12.5 Log recipe
- 13.1 Select application
- 13.2 Application specific settings
  - 13.2.1 Average time
  - 13.2.2 Auto start
- 13.3 Dynamic weighing using manual start
- 13.4 Dynamic weighing with automatic start
- 14.2 Search for Data Record / Add Data Record
- 14.3
- 14.4 Deleting data record (administrator only)
- 14.5 Print data record
- 14.6 Basic data record operations via context menu
- 14.7 Edit databases (administrator only)
- 16.1 Overview interface commands
- 16.2 General response format
- 16.3 Detailed information about interface logs
  - 16.3.1 Zeroing
  - 16.3.2 Taring
  - 16.3.3 Retrieve tare value
  - 16.3.4 Set tare value
  - 16.3.5 Send stable weighing value in standard weighing unit
  - 16.3.6 Send weighing value immediately in standard weighing unit
  - 16.3.7 Send weighing values for all platforms in default weighing unit immediately
  - 16.3.8 Send stable weighing value in current weighing value
  - 16.3.9 Send weighing value immediately in current weighing unit
  - 16.3.10 Start continuous output in standard weighing unit
  - 16.3.11 Stop continuous output in standard weighing unit
  - 16.3.12 Start continuous output in current weighing unit
  - 16.3.13 Stop continuous output in current weighing unit
  - 16.3.14 Set value for “Lower Threshold“
  - 16.3.15 Set value for “Upper Threshold“
  - 16.3.16 Retrieve value for “Lower Threshold“
  - 16.3.17 Retrieve value for “Upper Threshold“
  - 16.3.18 Press simulation “PRINT key“
  - 16.3.19 Send all implemented messages
- 16.4 Data format
9 Weighing
10 Parts counting
11 Percent determination
12 Formulation
13 Animal weighing
14 Database
15 Logs
16 Communication
17 Servicing, maintenance, disposal
- 17.1 Cleaning
- 17.2 Servicing, maintenance
- 17.3 Disposal
18 Troubleshooting guide / error messages
19 Appendix A – Variables for printouts
- 19.1 List of variables
- 19.2 Format variables
20 Appendix B – list “Function Keys“
21 Installation display unit / platform
- 21.1 Technical data
- 21.2 Weighing system design
- 21.3 How to connect the platform
- 21.4 Configure display unit
22 Conformity explanation/ test certificate