KERN & SOHN KET-TM User Manual
Page 101
KEN-TM / KET_TM-BA-e-1420
101
Counting with reference optimisation
For setting reference single weight (see
chap. 10.3.1or chap. 10.3.2), continue parts
counting.
The quantity placed on the weighing scale
will be used as new reference number of
parts and will be used as a basis for
reference single weight recalculation.
The info field shows the new reference
number of parts and the optimised reference
single weight.
Notes:
Reference optimisation will only be carried out when:
•
The number of placed parts is greater than the previous reference
number of parts.
•
The number of placed parts is not greater than double the previous
reference number of parts.
•
When reference optimisation is enabled, the
PRINT key cannot be used
for data transmissions to a connected printer.
•
You can use the
PRINT key to disable reference optimisation as soon as
it is sufficient.