KERN & SOHN KET-TM - Manual (Page 24)

24 KEN-TM / KET_TM-BA-e-1420
6.4 How to connect the platform
See chap. 21 “Installing display unit / platform“.
Please also follow the instructions for installing a platform, as these contain all the
details for the set-up and first start-up.
6.5 Mains connection
Power supply is achieved via external power units (KET-TM only). The stated voltage
value must be the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by KERN.
6.6 Commissioning
+
Connect scale to power supply.
 Connect display unit to power supply; the red status light will light up.
 Press and the operating system will be loaded when the red status light is
flashing.
Wait until the start screen followed by the user interface is displayed.
 As soon as the weight display appears, the balance is ready for weighing. On
delivery, the weighing scale will be in a logged-out status, that is, merely the
simplest functions such as Weigh or Tare are enabled, see chap. 6.9.
To obtain full access to the user parameters and to the editing functions of
databases, the user has to log on as administrator by following the steps below:
Later on, the last used user profile will be loaded on start-up.