KERN & SOHN KET-TM - Manual (Page 56)

56 KEN-TM / KET_TM-BA-e-1420
Tab. 4:
Operating mode for
thresholds
MIN, MAX
Stable – pilot light for thresholds MIN, MAX
will be visible after exceeding the LO threshold and
after reaching a stable weighing result;
Unstable – pilot light for thresholds MIN / MAX will be
visible after exceeding the LO threshold.
Operating mode of
OK threshold
Stable – pilot light for threshold OK will be visible after
exceeding the LO threshold and after reaching a stable
weighing result;
Unstable – pilot light for threshold OK will be visible
after exceeding the LO threshold
Pilot light colour for MIN
threshold
Select pilot light colour for threshold MIN, 18 colour
options available
Pilot light threshold for OK
threshold
Select pilot light threshold for threshold OK, 18 colour
options available
Pilot light colour for MAX
threshold
Select pilot light threshold for threshold MAX, 18 colour
options available.
Gradient Turn on / turn off filling flow for type “Gradient“.
Background colour
Select background colour for bargraph, 18 colour
options available.
Frame colour
Select frame colour for bargraph, 18 colour options
available.
3. Pilot light setting (checkweighing)
Three colour pilot lights indicate whether the load is within the tolerance limits (MIN /
MAX threshold).
The signal lights provide the following information:
Target weight below lower
tolerance limit
(MIN threshold)
Target weight within
tolerance range (OK
threshold)
Target weight above
upper tolerance limit
(MAX threshold)