KERN & SOHN KET-TM - Manual (Page 57)

KEN-TM / KET_TM-BA-e-1420 57
Settings:
Tap < Signalling checkweighing
ranges >.
Menu will appear, see table. 4.
4. Linearity
Function:
The bargraph display moves from the left to the right and proceeds equally to the
weight loaded onto the weighing balance. Its full width is reached at maximum load.
For tolerance controls such as dosaging, apportioning or sorting the balance will
display violated upper or lower limits vie the bargraph display. The analogue
bargraph display (length of displayed bars) indicates where the weight of the
weighed goods comes in the tolerance range. The tolerance range is always
standardised between target value and limit values (Min / MAX threshold) so that it
corresponds to the bar length of the bargraph.

Target weight below lower tolerance limit (MIN threshold):

Target weight within tolerance range (OK threshold):

Target weight above upper tolerance limit (MAX threshold):