KERN & SOHN KET-TM - Manual (Page 92)

92 KEN-TM / KET_TM-BA-e-1420
9.4 Tare mode
Tap
< Tare mode >.
Select tare mode; see table below. 8.
Tab. 8:
Subsequent
tare weight
This function allows multiple taring. The limit is reached when the whole
weighing range is exhausted.
Example:
 Place first container or packaging on weighing scale and press the
TARE key. The tare weight will be saved and zero display and [ Net]
indicator will appear.
 Weigh the material, the net weight will be indicated.
 Place second container or packaging on weighing scale and again
press the TARE key.
 The loaded total weight will be saved as the new tare weight and zero
will be displayed. Weigh load into the second container, net weight
will be displayed.
 For additional containers / packaging repeat these steps.
Total of
current
When selecting a product with tare value from the database
you can increase this tare value numerically by pressing the function key
(For assigning function key, see chap. 7.4.2). Each new tare value
entry overwrites the previous tare value. Everything is based on the
original value in the database.
Total of
all
When selecting a product with tare value from the database
This value can be increased numerically by pressing the function key
(For assigning function key, see chap. 7.4.2). Each numeric tare value will
be added to the previous tare value.
Auto tare Each first stable weighing value will be automatically imported as tare
value. Zero display and indicator [Net] appear. Place filled weighing
container on weighing scale and the net weight will be shown.
Each
measurement
Each confirmed weighing value will be imported as tare value.