KERN & SOHN KET-TM - Manual (Page 29)

KEN-TM / KET_TM-BA-e-1420 29
6.9.4 Weighing with tare
 Taring
The dead weight of any weighing container may be tared away by pressing a button, so
that the following weighing procedures show the net weight of the goods to be weighed.
 Put weighing container on the weighing pan.
 Wait until the stability display appears ( ), then press . Zero display and
indicator ( Net) appear. The weight of the container is now internally saved.
 Weigh the material.
 Wait until the stability display appears ( ).
 Read net weight.
• Tare weight can be allocated to a product in the database. Tare weight
will be loaded automatically as soon as a product is selected.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• Taring negative values is prohibited. The attempt of taring negative
values will result in error message “Err 3“
• The taring process can be repeated any number of times. The limit is
reached when the whole weighing range is exhausted.
 Numeric entering of tara weight
 Press or the the function key (allocating function key, see chap.
7.4.2) and the numeric input window will appear.
 Enter known tare weight and confirm by tapping . The balance returns to
weighing mode.
The entered weight will be saved as tare weight whereupon the indicator [ Net]
and the tare weight including minus sign will appear.
 Place the filled weighing container.
 Wait until the stability display appears [ ].
 Read net weight.