KERN & SOHN KET-TM - Manual (Page 100)

100 KEN-TM / KET_TM-BA-e-1420
The setting options for the application “Parts counting“, are with a few exceptions
identical to those of the application “Weighing“. For that reason the description below is
restricted to the divergent settings.
10.2.1 Automatic reference optimization
This function is used to determine whether the reference single weight is to be
optimised automatically during counting.
At every reference optimisation, the reference piece weight is calculated anew. As the
additional pieces increase the base for the calculation, the reference also becomes
more exact.
Activate function:
Tap
mass>.
Function deactivated
Function activated