HTC Butterfly 2 - Manual (Page 130)

Setting up your remote control
Tired of shuffling your TV, set top box, and home theater system remote controls
while watching TV? You can combine them into one remote.
§ Make sure you have created a Room. By default, your first Room will be called "TV
Room". See
Adding another EPG on page 127 to add more Rooms.
§ Make sure HTC Butterfly 2 has an Internet connection.
1. Open the TV app.
2. If you have more than one Room, tap > to select the Room you want to
create a remote for.
3. Tap > Start.
4. Select the devices you want to control with your remote, and then tap Next.
The TV option can't be deselected.
5. Select the brand of your TV, and then tap Next.
6. Make sure your TV is off, and then tap Next.
7. Point HTC Butterfly 2 towards the TV and tap the blinking button on the screen.
8. Tap Yes if HTC Butterfly 2 was able to turn on your TV, and then follow the
onscreen instructions to continue setting up the other devices.
§ If the TV didn't turn on, tap No. HTC Butterfly 2 will try another remote
control profile.
§ If a matching remote control profile isn't found, you'll need to manually set
up the remote control.
Customizing the remote control buttons
Are the predefined buttons not to your liking? You can change any button.
To avoid conflict with the EPG, it is recommended to not change any of the buttons
on the Number pad tab.
1. Open the TV app.
2. Tap > > Button setup.
3. Tap a button to configure.
Swipe to the More tab to add and configure more buttons.
4. Align the IR port on HTC Butterfly 2 with the IR port on your device's remote
control. Your HTC Butterfly 2 and your device's remote control should be less
than 5 cm apart.
130 Entertainment