Crooked pin, Straight pin, Hookingupthetyivcr(cont’d) 7 – Philips CCX193AT User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HookingUptheTYIVCR(cont’d) 7
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Deia/fe are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT jack on the VCR to the AUDIO (In)
Jack on the front of the TV/VCR.
AUDIOA/IDEO
Jacks on front
ofTV/VCR
Use a Video cable to connect the VI DEO OUT Jack on the
VCR to the VIDEO (In) Jack on the front of the TV/VCR.
Plug in the TV/VCR.
Before you turn on the TV/VCR, go to page eight.
Heipful Hints
Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent If the
pin is bent, straighten it as illustrated, then connect it to the ANT(enna) jack.
A rod antenna (not supplied) is avoj7ab/e from Philips Service Company.The part number is 4835 303 37006.
To order, call 1-800-851-8885.
Audio and video cables are not supplied.
Crooked Pin
Straight Pin