Philips CCX193AT - Manual (Page 39)

Timer Recording With the VCR Plus* Programming System (cont’d) 39
Press the Number I button to record in SP speed^the
Number 2 button to record in LP speed, or the Number 3
button to record in SLP speed. Your selection will appear to
the right of REC SPEED on-screen, although SP=I LP=2 SLP=3 will
continue to flash. For details about tape speed, see pages 29 and
51 .You cannot use the (Tape) SPEED button at this time.
ONETIME PROGRAM
PROGRAM I
CHANNEL 09
TIME ON 10(30 PM
TIME OFF 11(30 PM
RECS=£ED SLP
SP=l LP=I SLP=3
START DATE l
FRIDAY
. TO END PRESS EXIT
Press the STATUS/EXIT button. PROGRAM WAS COM­
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on-screen.
o If there is not a tape in theTV/VCR, PLEASE INSERT CASSETTE
also appears on-screen.
o If there is a tape without a record tab in theTV/VCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
Turn off theTV/VCR power. The REC(ord) light will flash. If you
forget to turn off theTV/VCR, PLEASETURN OFF FORTIMER
RECORDING appears on theTV/VCR screen two minutes before
a timer recording starts.
Helpful Hints
TheTV/VCR must be off for
a timer recording to take
place! Make sure there is a
tape in the TV/VCR.
• To exit the VCR PIus+ programming
system at any time, press the STA­
TUS/EXIT button.The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
theTV/VCR.