Automatic operation features 49, Notes, Automatic operation features – Philips CCX193AT User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Operation Features 49
The following playback features will always operate;
Automatic Playback
When you put a tape in theTVA/CR.the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. (If a timer recording is set, you may have to press the
POWER button to turn on theTVA/'CR. If theTV/VCR is turned
off and a timer recording is set, theTVA^CR will not accept a tape
that is missing a record tab.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TVA^CR will rewind the tape, stop, turn itself off, dien eject the
tape. If a real time counter memory is set, the TV/VCR will only
rewind the tape to the point at which the real time counter was
set to zero, then stop. The TV/VCR will not turn itself off or eject
the tape.
Memory Rewind, Power Off
When the POWER button is pressed while theTV/VCR is rewind
ing a tape, REW ^ POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real time counter memory is set, the TV/VCR may only rewind
the tape to the point at which the real time counter was set to
zero, then turn itself off.
Tape Eject
A tape can be ejected with theTV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off theTV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR has automatic tracking, which condnually adjusts
tracking to give you the best possible picture quality. With some
recordings, however, you may get a better picture using the manual
tracking controls (see below).
Manual Tracking
To adjust the tracking manually during tape playback, press the
CHANNEL Up/Down buttons on theTV/VCR.
NOTES:
• To return tracking to the position it v/as in when the TV/VCR was
shipped from the factory, press the CHANNEL Up/Down buttons on
the TV/VCR at the same time.
• Tracking is returned to automotic tracfdng when a tape is inserted, or
when the STOP/Y button is pressed to halt playback.
Before Tracking
Adjustment
After Tracking
Adjustment