Philips CCX193AT - Manual (Page 30)

30 One Touch Recording
The one touch recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer
Before you begin, make sure:
o Channels are programmed.
o There is a tape in theTV/VCR.The record tab must be intact.
Use the CHANNEL Up/Down buttons or the Number
buttons to select the channel you want to record.
Press the (Tape) SPEED button until the desired record­
ing speed (SP, LP, or SLP) appears on-screen. Detaik are on
page 29.
Press the REC(ord)/OTR button repeatedly, until the
desired recording length appears in the upper right corner of the
screen. Recording will begin immediately.The REC(ord) light will
appear.
■^OTR
CHI2
L№)GTH
CANCEL
LENGTH 0;30
PRESSOIR
PRESS CLEAR
To stop an OTR before recording is finished, press the
STOP/EJECT button on theTVAfCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/V button on the
remote control.
Press the STOP/EJECT button
on theTV/VCR to stop the
OTR.
© CD CD ©j
CD CD ®
CD CD ©1
t-v7ïï li'Dw'.:;
-Î-0 O ©
a _ o
o d c d c d G
h o o o o
oooo
PHILIPS C2H]2Ea
Helpfu! Hints
“ To check the time remaining ^r on
OTR after the OTR has been set
press the STATUS/EXIT button.
* To change the recording length while
an OTR is in progress, press the
REC(ord)/0TR button until the
desired recording length oppears on­
screen.
« You can not pause an OTR.
» To cancel an OTR, but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR button.
• You cannot record if the TV/VCR is
in Record Defeat mode. Deíoí/s ore
on page 40.
» You can change the tape speed with
the (Tape) SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
" If the end of the tape is reached
during an OTR, recording will stop.
The TV/VCR will eject the tape and
shut itself off. The REC(ord) light
may flash.