6 hooking up the tv/vcr, Hooking upyourtv/vcr with a cable box, Hooking up your tv/vcr with an indoor antenna – Philips CCX193AT User Manual
Page 6: Hooking up thetva^cr -7, 6 hooking, The tv/vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 Hooking
up
the TV/VCR
Hook up yourTVAfCR using one of the connections shown.
Hooking Up Your TV/VCR
With a Cable Signal or
Outdoor Antenna
3)
1^0
Hooking UpYourTV/VCR
With a Cable Box
To view any channel, set the TV/VCR
to the Cable Box output channel
(channel 03 or 04).Then, select chan
nels at the Cable Box.
Hooking Up Your TV/VCR
With an Indoor Antenna
To install a rod antenna (not sup
plied), push the stem of the antenna
into the antenna hole on the top of
theTV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of theTV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
«