24 adjusting the picture controls, Adjusting the picture controls 4 - 2 5 – Philips CCX193AT User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24 Adjusting the Picture Controls
Follow these steps to adjust the TY/VCR’s brightness, picture,
color, tint, and sharpness.
Press the MENU button to display the pop up menu.
TO ADJUST PRESS+/-
IIIIIIH
- BRIGHTNESS
PiCTURE
COLOR
Tlt'fT
SHARPNESS
TV RESET
Press the PLAY/A button or the STOP/T button to select
the desired control (BRIGHTNESS, for example).
Press the REW(ind)/- button or the F.FWD/+ button to
adjust the picture control. {Refer to the chart on page 25.)
4
When you finish, press the STATUS/EXIT button.
Helpful Hints
The on-screen menus shown on
page 25 will disappear from the
TVIVCR screen if no adjustments
are made within 60 seconds.
The original settings will probably
give you the best picture quality.
To reset the picture controls to the
original settings, press the MENU
button, then press the PLAY/A but
ton or tbe STOP/V button to select
TV RESET, then press the F.FWD/+
button.TV RESET COMPLETED will
appear on-screen briefly.