Helpful hints – Philips CCX193AT User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Up the VCR Plus* Programming System (confd) 37

Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns.You’ll notice that some

stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not

match. Where the channel numbers DO NOT match, you must tell

theTVA^CR the VCR Plus+ and Cable/TV channel numbers
according to the following steps. i

Make each entry within 60 seconds of the previous entry.

Press the MENU button to display the pop up menu.

Press the PLAY/A button or the STOP/T button to select

VCR SETUP, then press the F.FWD/+ button.

VCR SETUP

1 ONETIME PLAY [ON]

2 REPEAT PLAY
3 ON-SCREEN MODE
4 RECORD DEFEAT [OFF]
5 VCRPLUS+REF.MAP

TO SELECT PRESS NUMBER
TO END PRESS EXIT

Press the Number 5 button to select VCR PLUS+ RER MAR

VCR PLUS+ CROSS REE MAP

VCRPLUS+

CABLETTV

124
125

---------------^ —

TO SEUCT CH PRESS CH A/T
THEN ENTER CH NO.

V TO END PRESS EXIT

Look at the lists you filled in on page 36, For stations whose

VCR Plus+ and Cable/TV channels do not match, press
the CHANNEL (Up/Down) buttons until the arrow is

beside the VCR Plus+ channel you need.Then, press the

Number buttons to enter the corresponding Cable/TV

channel from your list. (Enter a “0” before single-digit channels.)
Continue this process until you have entered all the stations on
your list

/CR PLUS+ CROSS REF. MAP

VCR PLUS+ CABLEfTV

124
(25

---------- ► 23

TO SELECT CH PRESS CH A/T
TO DELETE PRESS CLEAR
TO END PRESS EXIT

Examine the lists on

page 36.

Press the STATUS/EXIT button to exit

Helpful Hints

• To correct a Cable/TV channel num

ber, repeat the steps on this page.

• To dear a Cable/TV channel num

ber, repeat steps 3-5 on this page.

Then, press the CHANNEL

(Up/Down) buttons to select it Then

press the CLEAR button. Press the
STATUS/EXIT button to exit

• Always enter a "0” before single-digit

channels.

• To se/ect line input for the Cafa/e/7V

channel, press 0,0. A/V IN will

appear on-screen.

This manual is related to the following products:

CCX193AT99