Haltech IQ3 Data Logger Dash - Manual (Page 43)

IQ3 Data Logger Dash Installation Manual
43
Real Time Displays
1. Dash
2. User Gauges
3. On Track Telemetry
Provides the ability to view data in an analog real-time format. Additional information can be
found in the following sections.
User Defined Runlog Pages
1. User Page 1
2. User Page 2
3. User Page 3
Provides the ability to create custom Runlog pages. Additional information can be found in the
following sections.
Car Setup
1. Chassis Scaling
2. Tire Data
Chassis Scaling Runlog
The function of chassis scales is contained within this Runlog page. By inputting the four corner
weights of a scaled vehicle, the Chassis Scaling page can calculate the following information:
1. Total Weight
2. Cross Weight
3. Cross Weight Percentage
4. Left Side Total Weight
5. Left Side Total Percentage
6. Right Side Total Weight
7. Right Side Total Percentage
8. Front Percentage
9. Rear Percentage
10. Total Left Side Lead
11. Total Right Side Lead
Again, this information may be entered into the Chassis Scaling Runlog page, prior to the start
of testing. This Runlog page can also be used to calculate the set up information, while at the
shop. Simply input the corner weights and the Runlog page automatically provides the above
11 items.