Programmable mix "prog mix, Fu n c tio n, All channels) – Futaba 4PLS 2.4GHz FHSS User Manual

Page 70: Display "prog mix" screen by the following method

Press

(HOME screen)

(MENU 1 screen)

(PROG MIX screen)

(MENU 2 screen)

Press

Select
"PROG MIX "

Fu
n

tio

Programmable Mix "PROG MIX"

This function allows you to apply mixing between the steering, throttle, channel 3 and
channel 4.

-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)

- The mixing mode selection. (Master mixing mode)

Relating function

steering :EPA, STR EXP, D/R, SPEED, 4WS MIX

throttle :EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, ACCFW/BK

CH3

:EPA,BRAKE MIX,4WS MIX

CH4

:EPA,BRAKE MIX,ESC MIX

Additional Functions

The movement of the master channel side will be added to the movement of the slave
channel side.

Movement of the slave channel side

Programmable Mix "PROG MIX"

(All channels)

Function SW
PROGMIX

Program mixing adjustment

(Preparation)

- When "PROG MIX" is turned ON and OFF by switch, set

the switch by select switch dial function (P65).

(Mixing function ON/OFF)

Select the setting item "MODE" by the (JOG) button up or

down operation. Use the (+) or (-) and set the function to the

"ON" or "OFF" state.

“INH” : Function OFF
“ON” : Function ON. When the switch is OFF, “OFF” is displayed.

Display "PROG MIX" screen by the following method:

Function ON/OFF (MODE)
INH,ON(OFF)

Setup items

MODE : Function ON/OFF
LEFT :

Mixing rate (Left side)

RGHT :

Mixing rate (Right side)

MST

: Master channel

SLV

: Slave channel

MXMD : Mix mode
TRIM :

Trim

mode

Select button
- Select with the (+) or (-) but-

tons.