Futaba 4PLS 2.4GHz FHSS - Manual (Page 101)

Display "SYSTEM" screen by the following method:
Press
Press
Press
Press Select
"LAP LIST"
(HOME screen)
(MENU 1 screen) (TH MODE screen) (MENU 2 screen)
101
Fu
n
c
tio
n
System Functions "SYSTEM"
System Functions "SYSTEM"
The graphic liquid crystal screen display mode, buzzer sound and menu character mode,
etc can be set.
- "CONTRA" Liquid crystal screen contrast adjustment (20 steps)
- "BK-LHT" Liquid crystal screen backlighting display mode setup
(OFF, ON at button operation, normally ON)
- "LHT-TM" Setting of ON time (1~30 secs) when [ON at button operation] was selected above.
- "LHT-PM"Liquid crystal screen backlighting brghtness adjustment (30 steps)
- "BATT"Battery type setting (LiFe2/NiMH5/DRY4)
The T4PLS can use an optional rechargeable battery. However, the battery alarm setting is dif-
ferent from that of the dry cell battery (alkaline battery recommended). Therefore, always set the
battery type to match the power source used.
If used with the incorrect setting, the normal low battery alarm function will not work and the sys-
tem may stop before a battery alarm is generated. The usage time may also become extremely
short.
- "BUZZER"Buzzer sound tone adjustment (OFF, 100 steps)
- "OPE-TM"The power off forgotten alarm setting (OFF, 10 m)
- "MENU"Item which displays the basic menu screen in katakana characters for Japanese use.
- "DISP"HOME screen display mode setting (Telemetry data, Timer, Users name)
Setup items
CONTRA :Contrast
BK-LHT :Backlighting
mode
LHT-TM :Backlighting time
LHT-PW :Backlighting brightness
BATT :Battery type
BUZZER :Buzzer tone
OPE-TM :Power off forgotten alarm
MENU :Menu screen character
DISP :HOME screen display mode