Futaba 4PLS 2.4GHz FHSS - Manual (Page 30)

FHSS T-FHSS Normal speed
T-FH (NORM)
S-FHSS Normal speed
S-FH (NORM)
T-FHSS High speed
T-FH (HIGH)
S-FHSS High speed
S-FH (HIGH)
Push
Select "RX MODE"
by (JOG) button.
Push
Select TYPE with
the (+) or (-) but-
ton.
Select RX type with the (+)
or (-) button.
Press the (JOG) buttons
simultaneously for approxi-
mately 1 second.
(+) button (-) button
(JOG) button
30
In
itial S
e
t-
Up
If the receiver used and the RX type settings are different, change the RX type using
the "RX MODE" function. Which RX type is set can be checked at the HOME screen.
Receiver type change & How to Link
7KH¿UVWRSHUDWLRQGHVFULEHGEHORZVHWVWKH5;W\SH1H[WWKHWUDQVPLWWHUDQGUHFHLYHU
are linked and the transmitter ID No. is memorized at the receiver so that signals from
other transmitters will not be received. The telemetry type T-FHSS also simultaneously
memorizes the ID No. of the receiver at the transmitter so that data from other receivers
will not be received.
The RX type setting and transmitter and
receiver linking methods are described
KHUH5HIHUWRWKH¿JXUHDWWKHULJKWIRU
the edit buttons used.
1
Set the transmitter power switch to DISP. Se-
lect “RX Setting” by (JOG) button up or down
operation, and display the "RX MODE" screen
by pressing the (JOG) button.
2
Move the cursor to "TYPE: ----" by (JOG) but-
ton up or down operation, and select the RX
type with the (+) button or (-) button.
When the (JOG) button is pressed for approximately 1 second, an electronic sound is
generated and setting ends.