Flintec FAD-40 - Manual (Page 9)

FAD-40 Technical Manual, Rev. 1.06 December 2012 Page 9 of 52
Instrument with CANopen interface: Type FAD-40CO
Communication:
CANopen V.2.0 10 kbit/s...1 Mbit/s (automatic), galvanically isolated interface
Address range 1...126
Dimensions & weight 99 x 45 x 114.5 mm (L x W x H), weighs appr. 150 g
3.3. Housing
FAD-40 instruments come within a polyamide housing sealed to IP20. They are prepared for mounting on NS
37/7 or NS 35/15 standard DIN rails (see drawings).
22,5 mm 45 mm 99 mm
11
4,
5 m
m
View A View B Side view
View A: FAD-40, FAD-40MB
View B: FAD-40PB, FAD-40PN, FAD-40EN, FAD-40CO
Figure 3.2 – Dimensions
3.4. Accessories
Accessories supplied with the instrument
The following accessories are supplied together with the instrument. If any part
is missing, please contact your supplier.
F
A
D
-40
F
A
D
-40
MB
F
A
D
-40
E
N
F
A
D
-40
P
B
F
A
D
-40
P
N
F
A
D
-40
CO
4-pin and 5 mm pitch plug, light gray 1 1 2 2 2 2
7-pin and 3.81 mm pitch plug for load cell cable, black 1 1 1 1 1 1
6-pin and 3.81 mm pitch plug for Digital I/O and RS-485, black 1 1
3-pin and 3.81 mm pitch plug for Digital I/O, green 1 1 1 1
Installation CD (xFace software, technical documentation) 1 1 1 1 1 1
Table 3.1 – Accessories supplied with instrument
Accessories sold separately
The following accessories are available from Flintec.
F
A
D
-40
F
A
D
-40
MB
F
A
D
-40
E
N
F
A
D
-40
P
B
F
A
D
-40
P
N
F
A
D
-40
CO
RS-232C cable (3 m long) for connection with PC √ √ √ √ √ √
Junction box for load cell connection Refer to Flintec catalog
Open end load cell cable, 6 wire ( 0.22 cm
2
each ) Max. 200 meter length
Table 3.2 – Accessories supplied separately