Comtrol DeviceMaster NS-Link User Manual
Page 57
DeviceMaster Driver User Guide: 2000595 Rev. A
Loading Port Configuration - 57
Using Driver Configuration Files
6.
Highlight the configuration file and click Open. The configuration file loads in
a few moments.
7.
Make the appropriate choice for your situation:
•
Click No to the ComtrolApplet message, if you are using the file to set up
multiple devices with the same port-level settings.
•
Click Yes to the ComtrolApplet message, if you are using the file to restore
a specific device. For example, you needed to remove and then re-install the
DeviceMaster NS-Link device driver.
8.
Click Apply so that the configuration is saved on the device.
9.
Repeat
through 8 for each port that you want to restore.