Install the DeviceMaster NS-Link device driver to use DeviceMaster serial ports
as native COM ports and to set up secure COM ports. If you install the device
driver, you can also configure the ports for socket mode or serial tunneling. See

NS-Link Device Driver Configuration Considerations

on Page 27 for detailed

information about the NS-Link device driver.

Comtrol Drivers Management Console

This User Guide discusses how to install and configure Comtrol device drivers
using the Installation Setup Wizard and the Comtrol Drivers Management Console
for the NS-Link device driver.

The Comtrol Drivers Management Console is accessible through the Windows
Control Panel using a dedicated shortcut created during the initial device driver
installation process. The Comtrol Drivers Management Console allows you to
browse all installed and supported Comtrol products in one place and apply any
changes quickly.

Note: This User Guide discusses the DeviceMaster, see the RocketPort EXPRESS/

INFINITY, RocketPort and RocketModem (Universal PCI) Series User
Guide for Windows for adapter specific information.

You can refer to

Using the Comtrol Drivers Management Console

on Page 29 for

general information about the Comtrol Drivers Management Console.

Supported Operating Systems

The Comtrol Drivers Management Console supports the following operating
systems:

•

Windows 7, Windows 8, and Windows 8.1

•

Windows Server 2012, Windows Server 2008, and Windows Server 2003

•

Windows Vista

•

Windows XP