Comtrol DeviceMaster NS-Link - Manual (Page 54)

54 - Loading a Driver Configuration File DeviceMaster Driver User Guide: 2000595 Rev. A
Using Driver Configuration Files
2. Optionally, change the default file name and click Save.
Loading a Driver Configuration File
You must have previously saved a configuration file before you can load a
configuration file.
The driver configuration file uploads in portions:
• If you highlight a device and click Load Configuration and Apply for the device-
level configuration parameters to reload on the device.
• To load port-level configuration parameters, you must highlight a single port
and click Load Configuration and Apply. You must upload each port's
configuration parameters separately.
Loading Device
Configuration Use the following procedure to load the configuration file for device-level
information for your device.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click on the
Comtrol Drivers Management Console.
• Shortcut; located under Start > Program Files > Comtrol > Product_Name >
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.