Enabling secure data mode, Enable secure data mode, Enabling secure – Comtrol DeviceMaster NS-Link User Manual
Page 51: Data mode
DeviceMaster Driver User Guide: 2000595 Rev. A
Enabling Secure Data Mode - 51
NS-Link Device Driver Configuration
Enabling Secure Data Mode
In addition to enabling SSL mode in the driver, you must Enable Secure Data Mode
in the NS-Link web page. Use the following procedure to implement the Enable
Secure Data Mode option.
1.
Access the NS-Link web page using one of these methods:
•
Open your web browser, enter the IP address, and click enter.
•
Right-click the DeviceMaster in the Device Tree or Device List pane in
PortVision DX and click Webpage.
2.
Click the Security tab.
3.
Click Enable Secure Data Mode and Save.
4.
Configure your security key and certificate and click Set.
Click the Help button if you need information about key and certificate
management.