Toshiba TEC FDS-50 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11005
REG Key:
The REG Key is used by the cashier who operates
the register. This key can access the positions of
LOCK and REG.
The MGR Key is used by the manager or a person
authorized by the manager. This key can access the
positions of LOCK, REG, X, and MGR.
The MA Key is used by the manager who will daily
supervise the collection of money and the printout of
transactions recorded by the register. This key can
access the positions of LOCK, REG, X, MGR,
OFFLINE, and Z.
SET Key; The SET Key is used by the programmer. This key
can access the positions of LOCK and SET.
All the keys can be removed from the OFF or REG position.
GT LOCK (on Master Terminal only)
RTR
This lock is provided to read or reset the accumulated
sales not on a daily basis but on a weekly or monthly basis.
GTX Position;
This position can be accessed by the
GTX Key or GTZ Key, and allows to
issue GTX reports of consolidated data of
the terminals connected to the in-line
loop.
This position can be accessed by the
GTZ Key, and allows to issue GTZ
reports
of
consolidated
data
of
the
terminals connected to the in-line loop.
This position can be accessed by the
RTR Key, and allows to operate in-line
service jobs such as reports, Down Line
Loadings, etc.
The keys can be removed and inserted in the neutral
position which is marked with a dot.
-
4
-