Modifier entry – Toshiba TEC FDS-50 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EOl-11005

Manual Scale Item Entry

|Net Weiqht| ---------- ► to be continued to the top of each sequence in “Auto Scale

of the item

Without Tare” on the preceding page. In this case, the
[SCALE] key depression is mandatory.

NOTES 1. The Net Weight must be entered by the unit of 1I100LB (for LB specification)

or grams (for Kg specification),

2. The Manual Scale Item Entries can be prohibited by system option.

RETURN or VOID Scale Item Entry (always by manual weight entry)

[RETURN]

(for Void)

[VOID]

(for Return)

► to be continued to the top of the “Manual Scale

Item Entry” sequence above.

NOTES 1. The Net Weight must be entered by the unit of 1/100LB (for LB specification)

or g (for Kg specification).

2. The RETURN and VOID Scale Item Entries can be prohibited by system

option.

Modifier Entry

The operation patterns are the same as described for the Preset-price Menu Items in the

Individuel Menu Item

sub-section. Each modifier item is entered immediately after a

menu item that requires the modification. The modification descriptor (and the price if
preset) will be printed below the item to be modified on the terminal receipt and on the
Remote Kitchen Printer paper.

Using Code-preset Menu Keys

[Code-preset Menu]

Using [ITEM lif] Key

[Menu Item Code| [ITEM #]