Toshiba TEC FDS-50 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11005
The TEC Guest Check Printer DRS-107 may be connected to the FDS-50 series terminal as
an . optional device. The printer will operate printing if a slip is properly inserted at proper
timings during various operation sequences. {Refer to each operation sequence in the
preceding sections as to when the guest check slip is inserted.)
1.
The following are programmabilities as to the Guest Check Printer operations:
PRINT START LINE AND LIMIT LINE SETTING
Appropriate values should be set to meet the guest check slip used by each
store.
SYSTEM OPTIONS
•
Check Print in Non-tab Mode:
COMPULSORY or NOT COMPULSORY
•
Check Print in Tab Mode: COMPULSORY or NOT COMPULSORY
•
Line Feed Control for Check Paid:
YES or NO
•
Print Line Position for Check Paid:
IMMEDIATE or WITH LINE FEED
•
Check Total Format on [TOTAL], [PB], [CHECK PAID]:
WITH TAX or WITHOUT TAX
•
Header Line Print at [NEW CHECK] & [PB] Key Entries:
ONLY at [NEW CHECK] or EVERY TIME
•
Previous Balance:
PRINT or NON-PRINT
•
Date Print on Checks:
PRINT or NON-PRINT
2.
The gap of the slip inlet is opened for insertion and closed while printing. The
EJECT key on the printer can be pressed to open the closed gap. However,
please do not touch this key unless it is really necessary in such cases as
removing a paper Jam, operating a multi-page process, etc.
3.
When the system option “Line Feed Control for Check Paid ~ NO” is selected, a
Check Paid entry will print at the top of a guest check. That is, a separate slip is
needed for the Check Paid entry from the slip printed with the New Check and
Addition Order entries.
4.
When printing of a check requires more than a page, operate as in the following
for multi-page process:
1)
When printing reaches the last line (limit line) of the first page, printing
stops, and the AMOUNT portion of the display flickers.
2)
Withdraw the first page, and insert the second page. Then depress the
[C] key on the terminal keyboard. Printing resumes.
5.
As for the [LINE No.] key on the terminal, see the chapter of OFF-LINE MODE in
the Manager’s Guide.
GUEST CHECK PRINTER (GCP)
Refer to the print samples on the following pages.
- 6 3 -