Toshiba TEC FDS-50 - Manual (Page 59)

EOI-11005
Validation Print
A single-line validation print is possible for a media entry if the [VALIDATE] key is
installed.
Each entry of an item
or a Media Entry
Set a validation slip to
the Validation Slot of
the terminal printer.
Make sure that the "SLIP”
triangular lamp is
continuously lit.
[VALIDATE]
The entry is
printed on the
validation slip.
Withdraw the
validation slip.
The triangular lamp
goes out.
- VALIDATION PRINT SAMPLE -
NOTES 1. Printing occurs on the bottom side of the
slip. Please be certain to insert the slip
into the validation slot with the print side
downward.
2. No other operations can follow until the
validation slip already printed is
withdrawn.
3. When the “SLIP** lamp flickers, it
indicates that the last key is programmed
with the Validation Compulsory status. In
case a media key is with the Validation
Compulsory status, the drawer opens on
the completion of the validation print
4. When the media is short-tendered, the
tendered amount is printed. When over­
tendered, Whether the sale total or the
tendered amount is printed is decided by
the key status.
5. The following are p r o g r a m m a b l e
selections relating to validation:
(1) PRINT FORMAT
a) Date Print/Non-print
b) Consecutive No. Print/Non-print
(2) Single- or Multi-time Validation
(3) Validation Compulsory status on
Media Keys and other transaction
keys.
05-05-89 555 0£13TIP PAIDCASH 1,00
- 5 6 -