Toshiba TEC FDS-50 - Manual (Page 38)

EOI-11005
Scale Items (applicable only to items set with the “scalable” status)
Auto Scale Without Tare Subtraction (Place the item on the scale platter first.)
• ( [SCALE] ) -► ( [Unit Weight Code| [@/FOR] ) -
^ {1 to 11; see the table
(T) below)
[Code-preset Menu] ... (for a preset-price item through Code-preset Key)
[Menu Item Code| [ITEM #]
... (for a preset-price item through [ITEM #] Key)
[SCALE] ( [Unit Weight Code| [@/FOR] )
(T)
□
|Unit Price| [Code-preset Menu]
... (for an open-price item through Code-preset Key)
[Menu Item Code| [ITEM#] [Unit Price| [AMOUNT]
... (for an open-price item through [ITEM Key)
Unit Weight Code Table
Unit Weight Code LB Option Kg Option
1 1LB IKg
9 9LB 9Kg
10 ^LB 100g
11 ^LB lOOg
The LB or Kg option is determined by the system option of Unit
Weight selection.
NOTES 1. The [SCALE] key depression can be skipped for preset-price scalable Hems.
2. If the Unit Weight Code specification is skipped, the preprogrammed Unit
Weight will be active.
Auto Scale With Tare Subtraction (Place the item on the scale platter first)
[Tare Godei [TARE]
(1 to 9 which
corresponds each
preset tare
weight)
^ to be continued to the the arrows marked with “(T)”
in the above ‘Auto Scale Without Tare” sequences.
The net weight (the gross weight - the preset tare weight) is
displayed here.
-
35
-