Toshiba TEC MA-85-100 - Manual (Page 41)

Department Quantity Extension (Multiplication):
When more than three or four items are to be entered with the same Department and
price, the Quantity Extension (multiplication) Is quicker than the Repeat Entry.
)
If an error occurs here:
j Possible cause of error:
I • Breeding the digit limit
I I ...........®/F0R I
Quantiv;
max. 6 digits
0.001 to 999.999
NOTE1
1
□□□□□□□
3 digits for
integer (max.)
ex.)
3 digits for
decimal (max.)
Required only for any
decimal portion entry.
123:
23.4:
0.234:
Open-price
Department
^ □...................□
Unit Price;
max. 6 digits
Preset-price
Department
Dept
Dept / Product must not N
\ exceed 7 digits. /
If an error occurs here:
Poss/We cause of error:
• Exceeding the LC of the
Department
Check the Unit Price.
-* See Listing
Capacity Open.
• Product exceeding 7 digits.
Check the Quantity
and Unit Price.
,(
Product must not
exceed 7 digits.
rn[2l[3l
HJHIIIIII (0)[m][i]i]
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
-*• Check ttie Quantity.
NOTES 1, When the QuanUty is a 1-digit integer (1 to 9) and a Preset-price Department
key is to foilowt the [X] key is omissible.
2. The product obtained by Quantity Extension cannot be repeated.
3. The decimal portion of the Quantity entry is processed down to the 2 digits
below the decimal point The fraction rounding at this time is fixed to ROUND
OFF.
4. You can select the rounding process of the fractions of the product (result of
multiplication) - ROUND OFF (inHiai setting), ROUND UP, or ROUND DOWN.
(Refer to Chapter **17. System Option Setting** Address 2 - Bits 1 and 2.
Receipt Print Format for Department Quantity Extension
Department
No. ^
1 2.
X
as
0 9
0 1
* a o o
T ^
- 3 9 -
■Quantity
■ Unit Price
■Product