Replenishing ink to the store name stamp – Toshiba TEC MA-85-100 User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01 -11072
Replenishing Ink to the Store Name Stamp
Remove the Printer Cover.
Remove the Stamp from the Stamp
Print Unit by pulling out upward with
your fingers on the notches of both
sides as shown in the figure.
Apply ink to the pad on the rear side
of the stamp. The amount of the
refilling should be adjusted according
to the density of the printed message,
but the limit of 2 cc should not be
exceeded. (The ink bottle suppled
contains 5 cc of ink.)
NOTES 1) Replenish the ink drop by drop several
times until the pad does not absorb any
more..
2) Allow time for ink to saturate the stamp.
Return the stamp in the reverse
procedure.
- 1 0 5 -