Optional accessories, 1. filter installation, 2. vs-2 voice synthesizer installation – Kenwood TS-850S User Manual

Page 77

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

7. OPTIONAL ACCESSORIES

Be sure to unplug the DC power cable before

starting work.

7-1. FILTER INSTALLATION

1. Remove the bottom cover of the transceiver.

2. Remove the screws and the filter cover as shown.

YK-88C-1 or
YK-88SN-1

p.yp

I Tn I

I II

I-O

L<2)

''■e tf-

YK-88CN-1 or
YK-88SN-1

■ YG-455C-1

YG-455CN-1

■O'

Notes

1. Avoid catching your fingers or the wiring

harness when closing.

2. When the YK-88SN-1 and YG-455CN-1 are

installed, 500 or 270 is displayed for the YK-

88SN-1, and 500 is displayed for the YG-
455CN-1. They are different from the actual

bands.

7-2. VS-2 VOICE SYNTHESIZER

INSTALLATION

1. Remove the top cover of the transceiver.

2. Plug the 8-pin connector onto the VS-2.
3. Use the three screws supplied with the VS-2 to

install the VS-2 on the chassis.

Caution

Keep the pan-head screw and cushion provided

with the VS-2 for later use. They are not needed

now.

3. Attach the filter(s) and secure it with the supplied

screws. The filters are not polarized so they may

be placed in either direction.

4. The desired filters can be arranged matching the

number of the filter switch to the number of the
installation for each filter.

] - YK-88

C -YG-455

VS-2

4. Replace the top cover.

5. Replace the bottom cover.