Receiving) – Kenwood TS-850S User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-6. AM OPERATION
AlP switch
When switched on
it
reduces interference
from
strong signals.
VOX/MAN switch
Used to operate VOX.
THRU/AUTO switch
THRU: Antenna tuner is off.
AUTO: Antenna tuner is on.
AGO switch
Becomes the time constant
for AM only regardless of the
position. (Except OFF)
ATT switch
This switch allows attenuation of
the input signal by 6, 12 or 18 dB.
HIGH BOOST switch
The high-frequencies of the
transmitted sound are emphasized.
1
□□ ^ <=i
ïi‘0
METER key
H
Used to select t
meter function in t
FILTER key
Changes the
selectivity.
7/^ 'V/ ////////////////,
V/////////A 77)
CiTDCuD r% i
ESCE
a
a H *
LajOij tt
a ÏÎ. j-
rm)r*i
MIC gain control
Microphone gain can be
adjusted during operation.
CAR contre
Used to a(
during AM.
PWR control
Power can be controlled in
all modes.
(RECEIVING)
n~l Turn on the DC power supply and then turn the transceiver’s power switch ON.
Q A frequency is shown in the display.
Press the UP/DOWN switches to select the desired frequency band.
When the 1 MHz step position is selected, the MHz indicator will light.
Q Select AM with the MODE key.
Turn the AF gain control clockwise until a signal or noise is heard.
6 Rotate the TUNING knob and select an open channel.
26