Jo. printing reports and lists, Act. report, All dial – Brother INTELLIFAX 710M User Manual
Page 76: Call back msg, User options, Memory status, Chapterlo, ❖ printing reports and lists, Memory status list -5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
M. ^ III i\i_r lO MINL^ Lib lb
JO. PRINTING REPORTS AND LISTS
You can print the following lists and reports under function item 3. PRINT REPORTS.
Level one
function
3. PRINT REPORTS
Level two
function
1. ACT. REPORT
Explanation of Options
The Activity Report lets you know
whether transmissions and incoming
faxes w’ere received.
2. ALL DIAL
3. COVERPAGE
4. CALL BACK MSG
5. USER OPTIONS
6. XMtT REPORT
7. MEMORY STATUS
This is a list of the names and numbers
that are stored in One-Touch and Speed-
Dial memory. Printed in One-Touch
and Speed-Dial number order.
This allows you to check the Cover Page
format.
Used to check the Call Back message
format.
The settings for Function menu 5~7
(USER OPTIONS, TEL OPTIONS and
SETUP SYSTEM) are printed here.
You can set up whether the Transmission
Verification Report will be printed after
all faxes you send.
ON/OFF
The
addressee
and
the
amount
of
occupied memory for items stored in
the memory are printed here.
Page
10-3
10-3
6-15
6-20
10-4
10-5
Other Reports
The following reports are printed automatically, for your information.
Help List (By pressing HELP on the control panel.) (See page 3-5~6)
Power Failure Report
Polled Report
Delayed Sending Report
Broadcast Report (Only for FAX-720M)
Helpful Hints • If you need an ACS eheclc sheet, press (left arrow) and (right
arrow) simultaneously.
• If you press (left arrow) and (right arrow) simultaneously
again, an ACS check sheet will not be printed.
10-1