Brother INTELLIFAX 710M - Manual (Page 68)

rAAtb A|>4y F f N G f N G
How to Turn the Distinctive Ringing Function ON or OFF ____________________
The distinctive ringing function is designed to accommodate the distinctive ringing service (a
telephone service that provides you with multiple numbers, each with a distinctive ring, on one
line). Please note that you need to register the ring pattern of your fax number before you can set
the distinctive ringing mode ON. (See page 7-11.)
STATUS OF LCD DISPLAY
1. Press FUNCTION.
2. Press 6
.
,S. Press 7.
4. Press (left arrow) or (right
arrow) to find the mode (OFF, SET,
ON) you want.
Example; ON.
5. Press SET.
6. Press STOP to exit.
f 2 /
D
f 6 . T E L O P T I Z)
( 7 . D I S I I N C T I V C y r ^ T
^ ^ D'l-yrtf mfygfOrFZ) ^
^ tl: grijEiCT 'V & SET ) ^
i DBSTINeTti/i:j3W )
BfSt rNCTtfE; tZl
JC^yOUR .
If you wish to use an external Telephone Answering Device (TAD) and the
distinctive ringing feature with your fax machine:
1. You niEist use the di.stiuctive ringing pattern for your fax number, otherwise
both the TAD and fax may conflict in picking up the call.
2. Select the TAD mode on your fax machine (see page 7-1).
3. Connect the external TAD into EXT. jack of your fax machine (see page 7-8). Do
not parallel connect the external TAD into other wall jack.
4. You must set the external TAD to its maximum ring delay setting (minimum 4
rings).
5. You can not use the Toll Saver feature of the external TAD when using the
distinctive ringing feature.
If you do not use an external Telephone Answering Device (TAD) with your fax
machine:
Select the MANUAL mode on your fax machine (see page 7-1).
7-23