beautypg.com

Isplay, 09/12/1w94 15:25, F fax – Brother INTELLIFAX 710M User Manual

Page 27: F tel, Enier & set, F tel:4155554445_r, Press function, Press 7, Press 4, Enter your fax number (up to 20 digits)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Setting the Station ID

The Station ID is for identification purposes. Here you can store your name, fax number, and

telephone number. Your machine then prints this information on the electronic Cover Page and

every fax page you send.

-:i0'

■'■‘.i" iu

ISPLAY

(

0 9 / 1 2 / 1 W 9 4

1 5 : 2 5 ]

( i v T E H P ' . s e T T i s W G s ; )

PlililillBlllrlfiM

............... ...... iia

C

f FAX

PtPliliiiaiiiiiaMiiiiip

:)

c

f T E L :

( E N I E R & S E T

D

f TEL:4155554445_r]

1. Press

FUNCTION.

2. Press 7:

3. Press 4,

You will then be prompted to enter your

fax number.

4. Enter your fax number (up to 20

digits).

Example:

4155554444.

5. Press

SET.

You will now be prompted to enter your
telephone number.

6. Enter your telephone number (up

to 20 digits).

If your telephone number and fax number
share the same line, enter the same
number again.
Example:

4155554445.

7. Press

SET.

Yon will be prompted to enter your name

or company’s name.

8. Enter your name by using the

number keys (up tq 20 characters).

Example:

BROTHER.

Refer to the section “How to Enter Text
in the Function Mode” on the page 3-7-8.

9. Press

SET

to confirm the entry.

10.

Press

STOP

to return to date and

time.

Helpful Hints

1. The telephone number that you stored above is only used for the Call Back

Message and the Cover Page features.

2. If you do not enter a fax number, no additional information can be entered.

3. When you enter a space, use (right arrow). Then it will be registered as a

blank space,

4. If Station ID has already been programmed, then after Step 3 the name will be

displayed with the prompt “1” to change “2” to exit. Press “1” if jmu need to
change any information. Pressing “2” to exit will take you out of the function.

c

t N A M E : ; : : - ;

r'ENTER & SET

:)

G

E:BROTHER

i 4

b

ST ATI OH ID

4-3