Brother INTELLIFAX 710M - Manual (Page 33)

pillili USING THE UNIT AS A TELEPHONE !■■■
5. USING THE UNIT AS A TELEPHONE
Your fax machine can be used to make regular telephone calls. You can dial numbers manually,
by pressing the number keys, or by using One-Touch or Speed-Dialing.
Manual Dialing ________________
1. Pick up the handset, or press HOOK.
2. When you hear a dial tone, you can begin dialing by pressing the number keys.
3. If you used HOOK, pick up the handset when the call is answered.
One~Touch Dialing
1. Pick up the handset, or press HOOK.
2. When you hear a dial tone, press the desired One-Touch key.
3. If you used HOOK, pick up the handset when the call is answered.
If you try to use a One-Touch number that has not been registered, you will hear a warning sound
and the display will carry a message reading,“NOT REGISTERED”. The display will return to
normal after 2 seconds.
Speed Dialing _______________________________________ ________________________
1. Pick up the handset or press HOOK.
2. When you hear a dial tone, press SPEED DIAL and then the two-digit Speed-Dial number.
3. If you used HOOK, pick up the handset when the call is answered.
FOR'tDDR .................................. .
1:::;
Using Keys with the Telephone
- Use REDIAL / PAUSE for putting a pause between numbers.
- Use HOLD to put a call on hold. You can put down the handset without
disconnecting the call. You must pick up the fex handset to release the call from
HOLD.
- Use # to switch the dialing type from “pulse” to “tone”. This key is also used for push­
button sendees, such as those offered by banks, credit card companies, or paging
services.
On Hook Dialing
When you make a call using HOOK, you can listen to the other end of the line, hut
they can’t hear you unless you pickup the handset. Also, if you press HOOK a second
time, the call will be disconnected.
5-1