Brother INTELLIFAX 710M - Manual (Page 55)

ECM (Error Correction Mode) Feature (Only for FAX-720M) ___________
The Error Correction Mode (ECM) is a means for checking the integrity of a fax transmission
while it is in progress. ECM transmissions are only possible between machines that both have the
ECM feature. Your machine has this ECM feature so if other party also has ECM, you can send
and receive a fax message that is continually checked for its integrity.
Sufficient memory must be available for this feature to work.
Error Re-Transmission ( Only for FAX-720M) __________________
Error-Re Transmission is helpful when the receiving machine does not have ECM. Even though
your machine cannot check the integrity of the message, it will send the page(s) again after
occurrances of accidental noise have caused an error.
1. Press FUNCTION.
2. Press 5.
3. Press 5.
4. Press (left arrow) or (right
arrow) to choose either ON or OFF.
Example; ON
5. Press SET.
6. Press STOP to exit.
( 0 9 / 1 ? / 1 9 9 4 1 5 : 2 5 i
... )
S E:R..01,V1
( 5 . E R R O R R E - T X
1
; E R R O R R r - T X : 0 F F
S E L E C T < - - > & S E T 1 - ^
i E R R O R R E : - T X : 0 N 1
[ 5 . ERRbI'
- This feature is only available for memory transmission using Quick-Scan (see page
6 - 6 , 6 - 8 - 10 ).
6-22