beautypg.com

Sending faxes, The auto document feeder (adf), Getting ready to send a fax – Brother INTELLIFAX 710M User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

■il

DOCUMENT BASICS

SENDING FAXES

HI

The Auto Document Feeder (ADF)

The Auto Document Feeder (ADF) automatically feeds documents (up to 15 pages) into the fax

machine, one at a time. The thickness and weight of the documents should fall into the following

categories:

Thickness: For one sheet: 0.07 to 0.12 mm (2.8 x 10‘^ to 4.7 x 10’^ inches).

For multiple sheets; 0.07 to 0.10 mm (2.8 x 10-^ to 3.9 x lO'^ inches).

Weight; For one sheet; 52 to 85 g/m^ (0.07 x 10'^ to 0.121 x 10'^ Ibs/inch^).

For multiple sheets; 52 to 80 giro? (0.07 x 10'^ to 0.114 x 10'^ Ibs/inch^.

As a reference, please note that the paper on which this is printed has the following thickness and
weight:
Thickness; 0.10 mm (3.9 x 10'^ inches)
Weight; 80 g/m^ (0.114 x 10'^ Ibs/inch^)

Before inserting documents into the document feeder, fan the sheets of paper to make sure the
documents are not sruck together. Then tap the leading edge on a table so that all the pages are
even when placed in the feeder. Make sure you always put the documents in face down.

Getting Ready to Send a Fax

Resolution

You can choose a setting (STANDARD, FINE, SUPERFINE, or PHOTO) for the resolution any

time before you press START or COPY. You can choose a setting by pressing the Resolution key.
( O means light off. means light on.)

STANDARD

O

fine
|- PHOTO

O S.RNE

The STANDARD resolution can be used for most typewritten
text. When the STANDARD setting is on, both lights are off
Transmission speed is uurmtil.

FINE

^ FINS

■ PHOTO

o S.FINE

SUPERFINE O

fine

PHOTO

PHOTO

S.FINE

FINE

PHOTO

S.FINE

The FINE resolution is an ideal setting to use if you want to send

documents that have small print. When the FINE setting is on,

the FINE light will be lit.
Transmission speed is slower than STANDARD.

The SUPERFINE resolution is a good setting to use for documents
with very small print or artwork. When the SUPERFINE setting

is on, the 8. FINE light will be lit.

Transmission speed is slower than FINE.

The PHOTO resolution is ideal for sending documents that have

varying shades of gray, such as photographs. The PHOTO setting
is on when both lights are lit.
Transmission speed is slower than FINE.

To set different resolutions for each page, refer to “Multiple Resolution Transmission” on page 6-

14.

6-2