Brother INTELLIFAX 710M - Manual (Page 17)

.
■Ì™
■Millil .......-iJ
3. HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY ^
User-friendly Programming __________
We have designed your fax machine with on-screen programming and a HELP key, user-friendly
programming that help you take full advantage of all the functions your fax machine has to offer.
On-screen Programming (OSP)
Since your fax programming is done on the LCD, we created step-by-step on-screen prompt
messages to help you program your fax machine. All you need to do is follow the prompt
instructions as they guide you through the function menu selections and programming options
and settings.
Function Selection Table ____________________________
If you have a basic understanding of how to program a fax machine, you can perform most of the
programming settings without the owner's manual. To help you understand what function
selections, options, and settings are found in your fax programs, we have the following Function
Selection Table.
Read through this table to gain a basic understanding of what your new fax model can do, and
then the next section will begin instructing you how to use on-screen programming.
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. TIMER
Use this for sending documents at a later
time.
6-6
2. POLLING
Polling is the process of retrieving faxes
from another machine. You can also choose
whether you want your polling secured or
not.
STANDARD/SECURE
STAN­
DARD
9-1-5
3. CALL
RESERVE
You can send a fax and then talk to the recipient
using the CALL RESERVE function.
ON/OFF.
OFF 6-19-20
L TEMP.
(TEMPORARY)
SETTINGS
4. CONTRAST
There are three types of contrast settings.
Usually the AUTO setting is acceptable.
But if you want to send an especially light or
dark
document, you should change this
Bet­
ting.
AUTO: Default setting is AUTO. Contrast
setting always reverts to AUTO af­
ter one transmission.
S. LIGHT: To send very light documents.
S. DARK: To send very dark documents.
AUTO 6-3
5. RESOLUTION
If you need to send a set of originals at
various resolutions, this function will allow
you to set the required resolution page by
page. (If all documents are the same resolu­
tion, use the RESOLUTION key. See page
2-4 #16.)
STANDARD/FINE/S. FINE/PHOTO
STAN­
DARD
6-14
3-1