Load the recording paper, Packing list – Brother INTELLIFAX 710M User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^L.
wr rKcr/AKMI IkJIN bthOkb USt
Packing List
Please check to see that you have
the following items;
Receive wire extension
Follow these steps to set up your fax machine;
1. Load the recording paper.
1) Lift up the machine top cover p)
by placing your finger in the
groove on the right-hand side
of the fax machine and lifting
up.
2) Pull the release levers (blue)
on both sides of the print head
cover (black) so that you can
lift it
up and remove the re
cording paper,
3) Take the new roll of record
ing paper out of its wrapper.
If
you are replacing a roll, you
need to remove any paper
remaining in the machine.
4) Insert the new recording pa
per into the paper bin, with
the paper coming over the
top of the roll.
5) Insert the edge of the paper
into the slot that says “
”
and pull the paper out about
10cm (4 inches) from the back
side. Make sure paper is fed
over the ACS bar. Adjust the
recording paper so that it is
between the marks.
Correct
Incorrect
Recording Paper
1-2