Brother INTELLIFAX 710M - Manual (Page 18)

nv^vv
leiiEiiE
Level one
function
Level two
function
Explanation of Options
—
Factory
setting
Page
1. TEMP.
SETTINGS
6. OVERSEAS
MODE
If you have trouble when sending overseas,
you may want to set OVERSEAS MODE to
ON.
ON/OFF
OFF 6-13
2. CANCEL
JOB
If you wish to cancel a job that has been set
with the timer, a polled job etc., use this
function.
6-12
3. PRINT
REPORTS
See page 10-1 for
a list of reports.
You can print several different lists and
reports, which are available under function
item 3. PRINT REPORTS.
10-1-5
1. ONE-TOUCH
DIAL
If you register names and numbers on One-
Touch dial keys, you can dial a number
automatically just by pressing a One-Touch
key.
4-4-5
4. SET AUTO
DIAL
2, SPEED-DIAL
Ifyou register names and numbers as Speed-
Dial numbers, you can dial a number auto­
matically just by pressing SPEED DIAL
and a two-digit number.
4-6
3. SETUP
GROUPS
(only for FAX-
720M)
This is used for setting up a group number
used for broadcasting.
4-8
1. SMOOTHING
Smoothing enhances the appearance of in­
coming faxes.
If you set SMOOTHING to UN, you will
receive messages with the smoothing en­
hancement.
ON/OFF
ON 7-4
2. BEEPER
You can adjust the volume of the beeper
with this function.
OFF/LOW/HIGH LOW 4-1-2
5. USER
OPTIONS
3. COVERPG
ON/OFF
If you set COVERPAGE to ON, you can
send your documents with a Cover Page
generated by your machine. When the
COVERPAGE setting is ON, you can select
a Cover Page comment.
ON/OFF
OFF 6-18
4. GRAY SCALE
(only for FAX-
720M)
You can select a GRAY SCALE level.
16/32
32 6-15
5. ERROR RE-TX
(only for FAX-
720M)
Ifyou set ERROR RE-TRANSMISSION to
ON, the machine automatically re-sends
the page once an error occurs.
ON/OFF
OFF 6-22
6. TEL
OPTIONS
1. rONE/PULSE
There are two different dial types and you
must select the type of signal suitable for
your telephone.
TONE/PULSE
TONE 4-1
3 2