Kenmore 19501 - Manual (Page 9)

SECT!01\i 2. PREPARE YOUR MACHiNE FOR SEWiNG
Set Up tile Machine (Continued)
Set the Pressure Dial
which you sew.
Positron the foot control as shown, with
your heel on the floor.
To increase speed, gently press down with
the bail of your foot.
To decrease speed, release your foot
pressure slightly.
NOTE: The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.
point to the arrow (" ^ ")•
You may rarely need to adjust the dial. But, if necessary, use
this dial to regulate the feed balance for;
» Buttonholes {See P 68 for details)
* Any "stretch" stitch such as patterns |l3
< Bll .
[ 30I ~ ^ ~ ]48| and monogramming
when sewing on very particular fabrics.
cover.
Set as follows:
fn , most sewing
2 . applique and Cut-Out Work
1 basting, sewing chiffon, lace,
organdy and other lightweight
fabrics
Also tor velours and knits
{with more stretch)