Kenmore 19501 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4. - PRACTICE COMMON STITCHiNGSk'tlLS.
1.
Fold back the left seam allowance as
shown.
2.
Turn under the right seam allowance to
forma
1 /8 " fold.
3.
Place the zipper teeth next to the 1 /
8 "
fold and pin in place.
NOTE:
Be sure the top ot the zipper
(the slider) is at the top of the
garment.
4.
Attach the presser bar to the right pins
on the zipper foot.
5.
Lower the zipper foot on the right side
at the bottom of the zipper so that the
needle pierces the fold and the zipper
tape.
6 .
Sew through the fold and the zipper
tape to the point where the slider begins.
7.
Lower the needle to hold the fabric and
raise the presser foot.
Lower the presser foot and stitch the
rest of the seam.
41