Kenmore 19501 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2, PREPARE-YOUR MACHINE FOR-SEWING
o To Remove the Bobbin from the Machine
• Wind the Bobbin
1.
Gently push down on the plastic
bobbin cover and slide it towards you.
2.
Set aside.
3.
Lift out the bobbin, as shown.
2.
3.
4.
5.
6.
Pass the thread through the top cover thread guide and under the hook, as shown.
Puli the thread around the bobbin winder thread guide.
Place the thread through one of the bobbirr holes, from Inside to outside, as shown.
Place the threaded bobbin on the bobbin winder spindle, as shown, so that the thread
comes out on top.
Push the bobbin winder spindle to the right until it clicks.
19